SENSOR RETROREFLECTIVE 4M PNP
Type | Description |
---|---|
Series: | E3FB |
Package: | Bulk |
Part Status: | Active |
Sensing Method: | Retroreflective |
Sensing Distance: | 3.937" ~ 157.48" (100mm ~ 4m) |
Voltage - Supply: | 10V ~ 30V |
Response Time: | 500µs |
Output Configuration: | PNP - Dark-ON/Light-ON - Selectable |
Light Source: | Red LED |
Connection Method: | Cable |
Ingress Protection: | IEC IP67, IP69K |
Cable Length: | 78.74" (2m) |
Adjustment Type: | Single-Turn |
Operating Temperature: | -25°C ~ 55°C |
UNIT2, 22/F., RICHMOND COMM. BLDG., 109 ARGYLE STREET, MONGKOK, KOWLOON, HK
Office Hours : Mon-Fri, 9:00-18:30(GMT+8)
Phone: 00852-52612101
WTL16P-34161120A00SICK |
SENSOR PROXIMITY 500MM NPN/PNP |
|
PIAT46UM.4X.4MTBanner Engineering |
PLASTIC FIBER, OPPOSED MODEC |
|
E32-LD11 2MOmron Automation & Safety Services |
LENSED DIFFUSE FIBER, M6 |
|
IAT23SBanner Engineering |
FIBER OPPOSED MODE R/A TIP |
|
VTBP6LQBanner Engineering |
CAP TOUCH SWITCH NO PNP |
|
HTB18-B1G2ABSICK |
SENSOR 150MM NPN/PNP LO |
|
E3Z-T61A-D 2MOmron Automation & Safety Services |
SENSOR THROUGH-BEAM 15M NPN |
|
PM2-LH10Panasonic |
SENSOR REFLECTV 5MM NPN OPEN COL |
|
FD-30Panasonic |
SENSOR REFLECTIVE 40CM R2 BEND |
|
T18SN6FF100QPBanner Engineering |
T18SN6FF100QP 6IN 4-PIN PGTL EUR |
|
LX6EQBanner Engineering |
PHOTO SENSOR EMITTER 300MM-2M |
|
WLG4S-3E1134SICK |
SENSOR RETROREFLCTV 3M NPN DO/LO |
|
GL10-R3811SICK |
SENSOR RETROREFLECTIVE 15M RELAY |