STEP MOTOR HYBRID BIPOLAR 2.1V
Type | Description |
---|---|
Series: | QMot QSH6018 |
Package: | Bulk |
Part Status: | Active |
Type: | Hybrid |
Coil Type: | Bipolar |
Voltage - Rated: | 2.1VDC |
Current Rating (Amps): | 2.8 A |
Steps per Revolution: | 200 |
Step Angle: | 1.8° |
Accuracy: | ±5% |
Torque - Holding (oz-in / mNm): | 155.77 / 1100 |
Size / Dimension: | Square - 2.362" x 2.362" (60.00mm x 60.00mm) |
NEMA Frame Size: | 24 |
Diameter - Shaft: | 0.315" (8.00mm) |
Length - Shaft and Bearing: | 0.945" (24.00mm) |
Mounting Hole Spacing: | 1.856" (47.14mm) |
Termination Style: | Wire Leads |
Operating Temperature: | -20°C ~ 50°C |
Coil Resistance: | 0.7 Ohms |
Features: | Flatted Shaft |
UNIT2, 22/F., RICHMOND COMM. BLDG., 109 ARGYLE STREET, MONGKOK, KOWLOON, HK
Office Hours : Mon-Fri, 9:00-18:30(GMT+8)
Phone: 00852-52612101
ERMO-12-ST-EFesto |
ROTARY DRIVE |
|
23KM-K249UNMB Technologies Corp. |
STEP MOTOR HYBRID UNIPOLAR 24V |
|
PM20L-180-043Lin Engineering |
PERMANENT MAGNET STEPPER MOTOR |
|
QSH2818-32-07-006-8192-ATTRINAMIC Motion Control GmbH |
STEP MOTOR HYBRID NEMA11 ENC 819 |
|
17PY-Z749UNMB Technologies Corp. |
STEP MOTOR HYBRID UNIPOLAR 24V |
|
WO-4418L-36Lin Engineering |
STEPPER MOTOR |
|
WO-211-18-02-ROLin Engineering |
STEPPER MOTOR |
|
103H7123-5740Sanyo Denki SanMotion Products |
STEP, F2, SQ.56, 1.8, , , BIPOLA |
|
FIT0278DFRobot |
HYBRID STEPPER MOTOR FOR 3D PRIN |
|
QSH2818-51-07-012TRINAMIC Motion Control GmbH |
STEP MOTOR HYBRID BIPOLAR 6.2V |
|
PD57-2-1276-TMCLTRINAMIC Motion Control GmbH |
STEPPER MOTOR HYBRID BIPOLAR 24V |
|
EPCS-BS-32-50-8P-A-ST-M-H1-PLK-AAFesto |
ELECTRIC CYLINDER UNIT |
|
44M100D2BPortescap |
STEPPER MOTOR PM BIPOLAR 12V |