Type | Description |
---|---|
Series: | - |
Package: | Tray |
Part Status: | Active |
Type: | - |
Coil Type: | Bipolar |
Voltage - Rated: | 24VDC |
Current Rating (Amps): | 600 mA |
Steps per Revolution: | 400 |
Step Angle: | 0.9° |
Accuracy: | - |
Torque - Holding (oz-in / mNm): | 30 / 212 |
Size / Dimension: | Square - 1.650" L x 1.650" W (41.90mm x 41.90mm) |
NEMA Frame Size: | 17 |
Diameter - Shaft: | 0.197" (5.00mm) |
Length - Shaft and Bearing: | 0.787" (20.00mm) |
Mounting Hole Spacing: | 1.220" (31.00mm) |
Termination Style: | Wire Leads |
Operating Temperature: | -20°C ~ 50°C |
Coil Resistance: | 12 Ohms |
Features: | Round Shaft |
UNIT2, 22/F., RICHMOND COMM. BLDG., 109 ARGYLE STREET, MONGKOK, KOWLOON, HK
Office Hours : Mon-Fri, 9:00-18:30(GMT+8)
Phone: 00852-52612101
NEMA23-22-02SD-AMT112SCUI Devices |
STEPPER MOTOR W/ INCREMENTAL ENC |
|
SH2862-52XB12Sanyo Denki SanMotion Products |
STEP, F2 MOTOR, SQ.86, 2 PHASE S |
|
2690Pololu Corporation |
STEPPER MOTOR W/38CM LEAD SCREW |
|
17PM-Z249BNMB Technologies Corp. |
STEPPER MOTOR HYBRID BIPOLAR 24V |
|
17PY-Z442UNMB Technologies Corp. |
STEP MOTOR HYBRID UNIPOLAR 24V |
|
PBM423FXK30-MSanyo Denki SanMotion Products |
PB, PB, SQ.42, FOR PB4A, , , |
|
PD20-1-1210TRINAMIC Motion Control GmbH |
PANDRIVE NEMA08, 24V, 1.75NCM |
|
WO-4118L-07PLin Engineering |
STEPPER MOTOR |
|
NEMA17-19-07SD-AMT112SCUI Devices |
STEPPER MOTOR W/ INCREMENTAL ENC |
|
35DBM10B2U-LPortescap |
STEPPER MOTOR PM LINEAR ACT 12V |
|
EPCS-BS-45-100-3P-A-ST-M-H1-PLK-AAFesto |
ELECTRIC CYLINDER UNIT |
|
PBM282FXE20Sanyo Denki SanMotion Products |
PB, PB, SQ.28, FOR PB3D, , , |
|
PD60-3-1276-CANOPENTRINAMIC Motion Control GmbH |
STEPPER MOTOR HYBRID BIPOLAR 24V |