IC OPAMP GP 2 CIRCUIT 8DIP
Type | Description |
---|---|
Series: | - |
Package: | Tube |
Part Status: | Active |
Amplifier Type: | General Purpose |
Number of Circuits: | 2 |
Output Type: | - |
Slew Rate: | 4.5V/µs |
Gain Bandwidth Product: | 28 MHz |
-3db Bandwidth: | - |
Current - Input Bias: | 80 nA |
Voltage - Input Offset: | 120 µV |
Current - Supply: | 2.5mA (x2 Channels) |
Current - Output / Channel: | 35 mA |
Voltage - Supply, Single/Dual (±): | 4.8V ~ 10.5V, ±2.4V ~ 5.25V |
Operating Temperature: | 0°C ~ 70°C |
Mounting Type: | Through Hole |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Supplier Device Package: | 8-PDIP |
UNIT2, 22/F., RICHMOND COMM. BLDG., 109 ARGYLE STREET, MONGKOK, KOWLOON, HK
Office Hours : Mon-Fri, 9:00-18:30(GMT+8)
Phone: 00852-52612101
TLV9004IPWRTexas Instruments |
IC CMOS 4 CIRCUIT 14TSSOP |
|
JM38510/12205BPARochester Electronics |
HIGH SLEW RATE OP AMP |
|
MAX4081FAUA+Maxim Integrated |
IC CURR SENSE 1 CIRCUIT 8UMAX |
|
OPA2365AIDRTexas Instruments |
IC OPAMP GP 2 CIRCUIT 8SOIC |
|
LTC6363HRD#TRPBFLinear Technology (Analog Devices, Inc.) |
IC OPAMP DIFF 1 CIRCUIT 16LFCSP |
|
MAX4257ESA/V+TMaxim Integrated |
UCSP, SINGLE-SUPPLY, LOW-NOISE, |
|
ACPL-796J-560EBroadcom |
IC OPAMP ISOLATION 1 CIRC 16SO |
|
MCP6034-E/STRoving Networks / Microchip Technology |
IC OPAMP GP 4 CIRCUIT 14TSSOP |
|
OPA192IDRTexas Instruments |
IC OPAMP GP 1 CIRCUIT 8SOIC |
|
MAX4206ETE+TMaxim Integrated |
IC OPAMP LOGARITHMIC 1CIRC 16QFN |
|
MCP6H04-E/SLRoving Networks / Microchip Technology |
IC OPAMP GP 4 CIRCUIT 14SOIC |
|
CLC4011ISO14MTRMaxLinear |
IC OPAMP VFB 4 CIRCUIT 14SOIC |
|
TL092CPSRTexas Instruments |
IC OPAMP JFET 2 CIRCUIT 8SO |