OPERATIONAL AMPLIFIER
Type | Description |
---|---|
Series: | - |
Package: | Bulk |
Part Status: | Active |
Amplifier Type: | General Purpose |
Number of Circuits: | 4 |
Output Type: | - |
Slew Rate: | 0.6V/µs |
Gain Bandwidth Product: | 1 MHz |
-3db Bandwidth: | - |
Current - Input Bias: | 200 nA |
Voltage - Input Offset: | 2 mV |
Current - Supply: | 2.8mA (x4 Channels) |
Current - Output / Channel: | 30 mA |
Voltage - Supply, Single/Dual (±): | 5V ~ 30V, ±2.5V ~ 15V |
Operating Temperature: | 0°C ~ 70°C (TA) |
Mounting Type: | Surface Mount |
Package / Case: | 14-SOIC (0.209", 5.30mm Width) |
Supplier Device Package: | 14-SO |
UNIT2, 22/F., RICHMOND COMM. BLDG., 109 ARGYLE STREET, MONGKOK, KOWLOON, HK
Office Hours : Mon-Fri, 9:00-18:30(GMT+8)
Phone: 00852-52612101
LMP8640HVMKX-F/NOPBTexas Instruments |
IC CURR SENSE 1 CIRCUIT TSOT23-6 |
|
TLC2652INRochester Electronics |
OPERATIONAL AMPLIFIER |
|
ISL28114FHZ-T7Intersil (Renesas Electronics America) |
IC OPAMP GP 1 CIRCUIT SOT23-5 |
|
THS4061CDTexas Instruments |
IC OPAMP VFB 1 CIRCUIT 8SOIC |
|
OP293FSZ-REEL7Linear Technology (Analog Devices, Inc.) |
IC OPAMP GP 2 CIRCUIT 8SOIC |
|
TL052IDTexas Instruments |
IC OPAMP JFET 2 CIRCUIT 8SOIC |
|
INA290A5IDCKTTexas Instruments |
INA290A5IDCKT |
|
MAX44267AUD+Maxim Integrated |
IC OPAMP GP 2 CIRCUIT 14TSSOP |
|
TL032IDRG4Texas Instruments |
IC OPAMP JFET 2 CIRCUIT 8SOIC |
|
LT1122CS8#PBFLinear Technology (Analog Devices, Inc.) |
IC OPAMP JFET 1 CIRCUIT 8SO |
|
INA2332AIPWRTexas Instruments |
IC INST AMP 2 CIRCUIT 14TSSOP |
|
SSM2118TSRochester Electronics |
VOLTAGE CONTROLLED AMPLIFIER |
|
AD8677ARZLinear Technology (Analog Devices, Inc.) |
IC OPAMP GP 1 CIRCUIT 8SOIC |