Type | Description |
---|---|
Series: | ADC |
Package: | Tape & Reel (TR)Cut Tape (CT) |
Part Status: | Active |
Connector Type: | Jack |
Gender: | Male |
Industry Recognized Mating Diameter: | 1.00mm ID (0.039"), 3.50mm OD (0.138") |
Actual Diameter: | 0.039" (1.00mm ID), 0.154" (3.90mm OD) |
Number of Positions/Contacts: | 2 Conductors, 3 Contacts |
Internal Switch(s): | Single Switch, Normally Closed |
Mounting Type: | Surface Mount, Right Angle |
Mounting Feature: | - |
Termination: | Solder |
Shielding: | Unshielded |
Features: | Board Guide, Solder Retention |
Insulation Color: | Black |
Voltage - Rated: | 18VDC |
Current Rating (Amps): | 3 A |
Mating Length/Depth: | - |
Ingress Protection: | - |
Material Flammability Rating: | UL94 V-0 |
UNIT2, 22/F., RICHMOND COMM. BLDG., 109 ARGYLE STREET, MONGKOK, KOWLOON, HK
Office Hours : Mon-Fri, 9:00-18:30(GMT+8)
Phone: 00852-52612101
DCJ235-05-A-K1-KGlobal Connector Technology, Limited (GCT) |
DC POWER JACK, THRU HOLE, HORIZO |
|
S760KHZSwitchcraft / Conxall |
DC POWER PLUG, Z SERIES, 2.0MM X |
|
PPM-3-3511-SGCUI Devices |
CONN PWR PLUG 1.1X3.5MM SOLDER |
|
PPM-2-5525CUI Devices |
POWER PLUG, 2.5 X 5.5 X 23 MM, S |
|
57-PJ80NTE Electronics, Inc. |
POWER JACK-DC PANEL MOUNT |
|
54-00063Tensility International Corporation |
CONN PWR JACK 2.1X5.5MM SOLDER |
|
KLDHCX-0202-B-LTKycon |
POWER JACK 2.50 MM DIA LOCKING T |
|
ADC-114B-4-WP-HT-T/RAdam Tech |
DC POWER JACK, WATERPROOF |
|
4840.2220Schurter |
CONN POWER JACK JSBJ4 SOLDER |
|
712ACFSwitchcraft / Conxall |
DC POWER JACK, IN-LINE, 2.5MM, S |
|
762ZSwitchcraft / Conxall |
DC POWER PLUG, Z SERIES, 2.1MM X |
|
DCJ250-10-A-K1-KGlobal Connector Technology, Limited (GCT) |
DC POWER JACK, THRU HOLE, HORIZO |
|
PPM-2-47517-SG-WTCUI Devices |
POWER PLUG, 1.7 X 4.75 X 21 MM, |