RX TXRX MODULE BLUETOOTH SMD
Type | Description |
---|---|
Series: | NINA-B3 |
Package: | Tape & Reel (TR)Cut Tape (CT) |
Part Status: | Active |
RF Family/Standard: | Bluetooth |
Protocol: | Bluetooth v5.0 |
Modulation: | GFSK |
Frequency: | 2.4GHz |
Data Rate: | 2Mbps |
Power - Output: | 10.5dBm |
Sensitivity: | -100dBm |
Serial Interfaces: | GPIO, UART |
Antenna Type: | Antenna Not Included |
Utilized IC / Part: | nRF52840 |
Memory Size: | 1MB Flash, 265kB RAM |
Voltage - Supply: | 1.7V ~ 3.6V |
Current - Receiving: | 4.8mA |
Current - Transmitting: | 14.1mA |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 85°C |
Package / Case: | 55-SMD Module |
UNIT2, 22/F., RICHMOND COMM. BLDG., 109 ARGYLE STREET, MONGKOK, KOWLOON, HK
Office Hours : Mon-Fri, 9:00-18:30(GMT+8)
Phone: 00852-52612101
ESP32-WROVER-IB (8MB)Espressif Systems |
SMD MODULE, ESP32-D0WD, 64MBITS |
|
WT41U-A-HCI21001Silicon Labs |
RX TXRX MOD BLUETOOTH CHIP SMD |
|
PIS-1040Pi Supply |
RX TXRX MODULE U.FL CARD EDGE |
|
SC600YWFPA-E53-TA0AAQuectel |
DESCRIPTION PLACE HOLDER |
|
MGM210L022JIF2RSilicon Labs |
RX TXRX MODULE BT PCB TRC SMD |
|
UC20GD-128-STDQuectel |
DESCRIPTION PLACE HOLDER |
|
MTQ-LAT3-B02.R2-SPMulti-Tech Systems, Inc. |
RX TXRX MOD CELL U.FL CHAS MNT |
|
FC21SD-Q73Quectel |
DESCRIPTION PLACE HOLDER |
|
FC31RAAMDQuectel |
DESCRIPTION PLACE HOLDER |
|
WT12-A-AI56IAPCSilicon Labs |
RX TXRX MODULE SURFACE MOUNT |
|
WT11U-A-HCI21001CSilicon Labs |
BLUETOOTH CLASS I 3.3V SMD |
|
WH-SSD50NBTLaird Connectivity |
SDIO/USB 802.11A/B/G/N |
|
ISM43362-M3G-L44-U-C3.5.2.4Inventek Systems |
RX TXRX MODULE WIFI U.FL SMD |