WIFI BLE NFC MODULE + ANT
Type | Description |
---|---|
Series: | TapNLink™ |
Package: | Tray |
Part Status: | Active |
RF Family/Standard: | Bluetooth, NFC, WiFi |
Protocol: | 802.11b/g/n, Bluetooth v4.2, NFC |
Modulation: | - |
Frequency: | 2.412GHz ~ 2.484GHz |
Data Rate: | 54Mbps |
Power - Output: | 15dBm |
Sensitivity: | -93dBm |
Serial Interfaces: | GPIO, SWD, UART |
Antenna Type: | Integrated, Chip, PCB |
Utilized IC / Part: | ESP32‐D0WD, ST25DV |
Memory Size: | - |
Voltage - Supply: | 2.3V ~ 3.6V |
Current - Receiving: | 50mA |
Current - Transmitting: | 110mA |
Mounting Type: | Connector Mount |
Operating Temperature: | -20°C ~ 55°C |
Package / Case: | Module |
UNIT2, 22/F., RICHMOND COMM. BLDG., 109 ARGYLE STREET, MONGKOK, KOWLOON, HK
Office Hours : Mon-Fri, 9:00-18:30(GMT+8)
Phone: 00852-52612101
CYBLE-013025-00Cypress Semiconductor |
RX TXRX MOD BLE 4.1 TRC ANT SMD |
|
K-MC1_LPRFbeam Microwave GmbH |
LOW POWER K-BAND TRANSCEIVER |
|
NINA-W156-03Bu-blox |
RX TXRX MOD WIFI BT PCB ANT SMD |
|
450-0144CLaird Connectivity |
RX TXRX MODULE BLUETOOTH SMD |
|
BGM123A256V2Silicon Labs |
RX TXRX MOD BLUETOOTH CHIP SMD |
|
EC21VFA-MINIPCIEQuectel |
DESCRIPTION PLACE HOLDER |
|
SARA-U260-00S-02u-blox |
RX TXRX MODULE CELL 3G AT&T SMD |
|
MGM111A256V2Silicon Labs |
RX TXRX MODULE 802.15.4 CHIP SMD |
|
EC25AUFA-MINIPCIEQuectel |
DESCRIPTION PLACE HOLDER |
|
BL620-SALaird Connectivity |
RX TXRX MOD BLUETOOTH CHIP SMD |
|
BB-WLNN-SE-DP551Quatech / B+B SmartWorx |
RX TXRX MODULE WIFI U.FL TH |
|
M95FA-03-STDNQuectel |
DESCRIPTION PLACE HOLDER |
|
MTQ-LVW3-B01.R2Multi-Tech Systems, Inc. |
RX TXRX MOD CELL U.FL CHAS MNT |